“Works”60+ pages
- p. 5 …Also,
Robert "Gus" Bell contributed with his attractive art work; Richard Wolf provided
invaluable computer expertise…
- p. 14 …Mensuration Working Paper, with Drawing and Photo
xiv
- p. 19 …The ruse worked. However, too much activity
was going on for the project to remain completely…
- p. 28 …The balloon which held
it up, if that is how it worked, must have been about…
- p. 31 …These works included: The Roswell Incident
(1980) by William Moore and Charles Berlitz; "Crashed Saucers: Evidence…
- p. 34 …specialists, including experienced persons who have
continually worked in Army and Air Force records systems since…
- p. 42 …or
classified about their work; they were told only that their work dealt with
meteorological equipment…
- p. 43 …of umbrella cover story to protect our work with MOGUL." Although the Air
Force did not…
- p. 44 …who is married to a staffer who works for Congressman
Schiff. Some of these persons provided…
- p. 48 …Synopsis of Balloon Research Findings by 1st Lt James McAndrew
33. "Mensuration Working Paper," With Drawing…
- p. 51 …to the case, and
that not enough work had been done to report
any results to…
- p. 55 …The work will be performed under GAO code 701034 by staff
from our National Security Analysis…
- p. 56 …Initial work will be performed at the Department of Defense, the
Services, specialized defense agencies, and…
- p. 59 …Secur~ty and Inter.nationa1 Affairs Division (National Security
Analysis) is doinq the work. The review…
- p. 75 …Mary Kathryn Groode, and his friend, John
Kromschroeder.
• A mortician who worked for the funCr.ll…
- p. 76 …Conversations with a dozen people who had worked in the Project Blue Book office
or with…
- p. 106 …This has caused a large back log o£ important work to pile up.
The following is…
- p. 145 …civilian,
Joe Shipman, who works with Col. Hackett is re~orted to have t~ld
the…
- p. 148 …Harness advised he thought we were getting the Merger Bill
worked out pretty fine.
9:35…
- p. 164 …I had two enJisted
agents "working for me" quote end quote.
RW: Who were the enlisted…
- p. 169 …He worked for an insane asylum up in the Washington DC area. I think his
wife…
- p. 170 …He did quite a bit of work for the Air Force, as I found through research…
- p. 183 …we went to all the different records. Working for me I have a group of reservists…
- p. 191 …I need two plug ins to make this
thing work.
SC: You need two?
RW: One…
- p. 196 …the &ranting or clearanc•• to do the work.
Both mthods haw bean succesatul.J¥ u.sod…
- p. 201 …I worked on naval activity such as the thermal affects on
SONAR. Concerning actual baUoon construction…
- p. 205 …Our subsequent work with the balloons and microphones was highly classified and
we didn't know…
- p. 206 …We didn't pattern our work after the Japanese balloons.
We were very secretive of our…
- p. 213 …Charles Ziegler was working on the history of nuclear weapons detection
capability. He had some letters…
- p. 214 …Concerning the name Maj Pritchard, he may have worked for me but I don't recall…
- p. 217 …Project Mogul and some of the other work
that you and Dr. Spilhaus and others have…
- p. 221 …He and I worked together. He was in Maine, and was not really
technically involved. I…
- p. 227 …With some difficulty we got Otto
Winzen who was the entrepreneur cmd promoter, working with Get…
- p. 228 …So you're doing that work from China?
And we
over and
the entire
our
A…
- p. 230 …Schneider and others from NYU,
also Irewin, Minton, Olson, NYU men worked on balloons, north
hangar."
- p. 233 …Before you left active duty, while you were still
working with Duffy and Spilhaus, did they…
- p. 234 …While I was at Georgia Tech I began working with
a microwave, an anonymous propagation research…
- p. 236 …The reason I got into balloons is that while I was working
on this manual there…
- p. 237 …At
that point you were working at New York University under the
direction .•.
A: Spilhaus was…
- p. 240 …He worked for a Tracer lab and is just bringing out a
book on the early…
- p. 242 …Just for the record, ·Major Marcel later worked at
AFOAT-1. Do you recognize him at…
- p. 251 …It often didn't work. That was the reason why for
Operation Sandstone in April and…
- p. 253 …We just worked out of motels in Roswell.
Q: I thought I saw you had a…
- p. 258 …When we sent people to
Roswell, Hackman worked out of a motel to receive.
So the…
- p. 259 …I do know that I worked carefully with a guy named Larry
Dyvad, a pilot, who…
- p. 260 …You were just
saying hey, what's going to work best to get the data, so…
- p. 269 …Tibbetts, the radar lieutenant working for Fletcher, said
that when they got these in '44 there…
- p. 274 …In the course of the research projects you worked on, in that time frame-the postwar…
- p. 275 …You were on-site in New Mexico when Charlie Moore was doing most of his work…
- p. 276 …Did he work for you at Watson Laboratories?
A: No. He didn't work for me…
- p. 279 …Do you recall any of the contractors he may have worked with?
A: No, I don…
- p. 280 …That's where John had his office, and I was there for a time doing work…
- p. 282 …We worked in the old Sun newspaper building in downtown Baltimore.
Q: They had intelligence personnel…
- p. 283 …I know he worked with
the U.S. Geological Survey, a very, very fine organization, and…
- p. 318 …rest on the ranch on which he worked near the town
of Corona, NM. This was…
- p. 322 …In addition, Crary maintlained
a detailed journal of his work throughout his professional career to incluc…
- p. 323 …25 Balloons most suitable for this type of
work were made of polyethylene, a very thin…
- p. 325 …9 appeared to have
been launched on July 3.34 On July 8, their work completed…
- p. 330 …It was apparent from Crary's diary that he had worked very closely with Major
Pritchard…
- p. 379 …MonOay he came to town to sell worked, must have bt!en about 12 some sort…
PROFESSOR MOORE - 6/8/94 15
June 4th, "Out to Tulerosa Range and fired charges between
o-o and o-6" something. "No balloon flight again on account of
clouds. Flew regular sonobuoy mike with cluster balloons and had
good luck with receiver on ground but poor on plane." I think
that's Flight 4 right there.
Q: so that's June 4th.
A: As to that flight made by Mirs and Hackman earlier, we
have no record of it here in the NYU summary.
Q: If he flew that on June 4th and it carried the
microphones, the radar reflectors, that would have been with a
neoprene type balloon.
A: There were no plastic balloons delivered until the 28th
or 29th of June that year. So everything as evidenced on the
Helgeland flight that we made and the other flight, they were all
meteorological balloons prior to late June.
Q: That would have also had the B Model reflector, this
type of reflector, but the B Model?
A: My memory is that Jim Peoples, because we were being
sent down by B-17 and by air, didn't let us take the radiosonde
receiving equipment which at that time was very heavy. It was
like a 500 pound rack with a receiver, frequency meter, recorder,
etc., and we weren't allowed to use that. Instead, the idea was
that Peoples would provide tracking on the balloons with radar
targets and so on. So this is where I think the radar targets
come in. If you look in these reports you'll find here
statements, radiosonde reception, and you'll see 60 percent with
recorder, so percent without recorder, 100 percent without
recorder for June 5th. A hundred percent without recorder.
so I think we tried the radar targets, as I remember, our
contact who was a Captain Larry Dyvad found that they weren't
able to track our flights at all. They had a radar that was
entirely aimed at looking at the missiles. To look at slow
moving balloons with poor signal return was difficult for them.
So we started off with making single target flights. I think we
went to multiple target flights, and still didn't have any
success, so I began putting radiosondes and then just audibly, as
the tones would change, I would log it on a piece of paper. I'd
count the pressure... Are you familiar with radiosondes?
Q: Somewhat.
A: The commutator with the pressure contacts, etc. I
would count contacts and record it and you'll see in some of
these flight reports, there's two different interpretations
possible, depending on what the contact sequence was. An
ordinary radiosonde is very good for something that's going one
way. But for something that's going to go up and float, you can