Documents / Report

Defense Intelligence Reference Document Laser Lightcraft Nanosatellites

Defense Intelligence Agency · 77 pages · text from the file's own layer

This Defense Intelligence Reference Document from the Defense Intelligence Agency, dated 1 November 2010, was produced under the Advanced Aerospace Weapon System Applications (AAWSA) Program. It describes nanosatellite technologies and proposes launching nanosats into orbit with laser Lightcraft propulsion. It also covers a weapon mission selection study and multi-megawatt laser options. The author recommends that the Department of Defense and NASA bring Lightcraft R&D back to the United States and restart the X-50LR flight demonstration program.

  • p. 13 …The only commands that the ground system sends would be program loads to resolve or work…
  • p. 15 …This concept has the advantage of using the ambient air as the working fluid in the…
  • p. 24 …And vehicle synthesis work determined that the remaining masses for the Lightcraft airframe, propulsion, and control…
  • p. 27 …This comparison is for a Lightcraft trajectory determined from optimization work during the latter phases of…
  • p. 56 …thermal properties in order to make them work. Thermal management is one of the many challenges…
  • p. 63 …As in many spectral regions, it is not easy to make resonator mirrors; many FELs work…
  • p. 71 …It is expected that all of the R&DTE work presently being done by the various…
UNCLASSIFIED/ ,'F&II. &FFUiil'°'I! l!llili a,112~·
Chapter 2: Laser Lightcraft Nanosatellite Propulsion
Laser propulsion is a new and exceptional method for reaching space. By launching
spacecraft on a beam of electromagnetic radiation, researchers will have developed the
first new method of achieving orbit since the late 1950's. In this concept, a remote or
ground-based energy source, such as a ground- or space-based laser beam generator,
transmits power to a spacecraft via a beam of electromagnetic radiation [1-8]. The
spacecraft collects the beam energy and uses it to power the propulsion system. This
concept has the advantage of using the ambient air as the working fluid in the
atmosphere and carrying propellant only for use outside the atmosphere, leaving the
energy source for heating the propellant on the ground. This results in a tremendous
weight reduction and improved performance benefit for the spacecraft because a large
propellant mass and heavy energy source are not carried onboard.
The laser-propelled vehicle, called "Ughtcraft" because it flies on a beam of laser light,
is designed to harness the energy of a laser beam and convert it into propulsive thrust.
In the earliest laser-propelled rocket designs, beamed energy from a ground-based
laser (with near-visible wavelengths) is absorbed by a heat exchanger onboard a
rocket, and is transferred to a working fluid. The heated fluid (hydrogen, ammonia,
etc.) then produces thrust by expansion through a nozzle as in a conventional chemical
rocket. An alternative to this scheme is to use the beamed-energy to ablate an
onboard solid propellant (such as Delrin) to generate thrust. However, a more recent
incarnation of this concept, developed by the Air Force Research Laboratory (AFRL) at
Edwards AFB, CA, is for the Ughtcraft to operate in two propulsion modes: airbreathing
(detonation wave) and rocket ablation (deflagration). The Lightcraft operates in air
breathing mode up to Mach 5 and 30 km altitude, and in laser thermal rocket mode
(using liquid, gaseous, or Delrin ablation propellant) in space [7, 8, 9-16]. Figure 1
shows the Air Force X-25LR (25 cm diameter) Ughtcraft concept. The Air Force X-SOLR
Lightcraft has twice the diameter as the X-25LR.
11
UNCLASSIFIED//F&II. &FFUilAI! l!llili 8111!1/

Not linked to a story yet.

About this file

Report, from the dia collection. The PDF is mirrored here; the original link is under it. 77 pages are in the text index: search them above, or from the library's search.