“BEAMS”43 pages
- p. 5 …Sketch of Two Opposite Limits of the Beam·Maxwellian Equilibrium .. 38
Figure 4.5. The Definition…
- p. 6 …Comparison of Analytical and Numerical Estimates of Q-Values in a
Beam-Dominated Solution -- for a…
- p. 8 …shows the "Star
Mode" discharge where ion beams are created that pass through the grid openings…
- p. 9 …discussed later where the recirculating ions possess
beam-like trajectories passing through the center of the…
- p. 10 UNCLASSIFIED/ ;raA 8FFIIItliL ~81!! SHL'f
beam-like ions. Since electron energy loss processes such as…
- p. 11 …In addition, its beam-like reactions (highly non-Maxwellian)
make the IEC very well suited for…
- p. 13 …a beam created at the anode and accelerated by the applied cathode
voltage; a low-energy…
- p. 14 …Good convergence is required to achieve
optimal beam-beam reactivity scaling for the application that require…
- p. 15 …The observed
loss of convergence with decreasing pressure and increasing current makes achieving
significant beam-beam…
- p. 16 …For a power reactor the objective is to obtain ion
beam-beam collisions in this central…
- p. 17 …the "conventional" beam-like
one. A key issue for this concept is how much plasma compression…
- p. 19 …The
main beam observed is a direct path along the injector
angle. Other faint light channels…
- p. 21 …Note that six ion "guns" were used to create a low energy ion beam that entered…
- p. 22 UNCLASSIFIED/;SflHl 8FFIIItliL ~81!! 8HL'I'
was obtained from recirculation beam-beam reactions in a potential…
- p. 23 …The key physics point is
that the beam-beam fusion rate scales as the ion current…
- p. 26 …Scoping calculations of beam-background fusion rates predict that a 3 He- 3 He reaction
product…
- p. 27 …of the ion density squared
scaling for beam-beam reactions.
REFERENCES
2.1 R. L. Hirsch…
- p. 28 …As such, the beam convergence (compression) is
limited to lower values, hence lower core densities (an…
- p. 30 …by
the intersection of the multiple ion beams, serves to deflect ions into the escaping jet…
- p. 31 …The result is the
formation of the intense space charge neutralized ion beam (or "plasma jet…
- p. 32 …in the
symmetric microchannels into a directed beam or jet.
Comparison to a Conventional "Plasma" Thruster…
- p. 33 …The ion beams finally exit through an opening in the ground sphere of the IEC device…
- p. 35 …These devices operate with ~ 80- keV D-ion beams using the non-Maxwellian
character of the…
- p. 36 …Two ion sources inject
40-keV deuterium and helium-3 ion beams toward the center of…
- p. 37 …Indeed in this case fusion is dominated by beam-beam (non-
Maxwellian reactions). Also, the dipole…
- p. 38 …the center potential and consequently allow incoming
beam ions to penetrate into the core region. In…
- p. 39 …Comparison of Analytical and Numerical Estimates of Q-values in
a beam-Dominated Solution -- for a…
- p. 40 …Hora, "Converging Beam Neutron Source for
Driving a Sub-critical Fission Reactor", Proceedings, ICONE 8, CD…
- p. 41 …Namely, the time scale for
collisional degradation of the beam-like ion distribution function is crucial…
- p. 42 …For example, a tightly focused monoenergetic ion beam is in
fact a pessimistic scenario, because different…
- p. 44 …Thus, weak sinks and strong sources will result in a
large beam population, increasing the beam…
- p. 45 …Sketch of Two Opposite Limits of the Beam-Maxwellian Equilibrium. The solid line
corresponds to a…
- p. 46 …injected beam current, average injection energy, energy spread associated
with the velocity component in both parallel…
- p. 47 …As stated in Section I, the current scaling
for beam-beam reactions is strictly 12. However…
- p. 48 …is very encouraging for formation of deep wells
in IEC devices designed for reactors using beam…
- p. 49 …To do this, it is
assumed that the electrostatic confinement equilibrium ion beams are proportional to…
- p. 50 …When an ion beam is hot, the waves excited by the instability are ion acoustic
type…
- p. 51 …Rider was particularly interested in the claim that due to its beam-like non-
Maxwellian plasma…
- p. 52 …Diagram Showing Equipotential
Surfaces of the IEC Cathode Grid and Their
Focusing Effect on a Beam…
- p. 59 …of detectors, the detector configuration, the collimated
beam size, the acquisition time, and other scan-related…
- p. 63 …Alternately, for space
propulsion, the proton beam, augmented by injection of heavy atoms to increase the…
- p. 68 …Due to its inherent non-Maxwellian (beam-like)
plasma, the IEC is especially well suited for…
- p. 70 …This configuration is highly
non-Maxwellian due to the beam
dominated nature of the trapped ions…
UNCLASSIFIED/;'P81il 8PPll!ltllt ~81!! 8HLV
An added long-term potential advantage of developing the IEC-jet thruster is that the
concept can eventually be extended to an ultra high impulse fusion power/propulsion
unit. Indeed, the thruster concept arose from work on a fusion based IEC (Reference
3.5). To move to fusion power, however, would require advances such as discussed for
terrestrial IEC power plants as Section VI.
JET Extraction From a Spherical IEC
A plasma jet can be extracted from the gridded spherical IEC by enlarging a grid
opening. This forms the basis for various exciting applications including a jet thruster
and various plasma processing uses such as gasification of municipal wastes and future
materials recycle. Here, to illustrate this asymmetrical geometry, we briefly consider
the IEC jet thruster for use in satellite operations and maneuvering (Reference 3.6).
Description of the IEC Jet Thruster
For conventional star mode operation, such as discussed earlier, the IEC grid is
designed to be highly symmetric so that the microchannel beams are also symmetric,
providing good convergence. However, experiments have demonstrated that enlarging
one of the grid openings distorts the potential surfaces. This results in the creation of a
very intense, tightly coupled space-charge-neutralized ion jet directed outward from the
central core plasma region (see Figure 3.2) (Reference 3.7), and it is this mode of
operation (star with jet) that would be employed for the proposed thruster.
(a)
/
Plasma Jet
Insulator-
Eledrvn
Em,tte~s
(b)
Figure 3.2. (a} Jet Operational Mode in Experimental IEC Device and (b} Jet Set-up
The jet formation has been explained theoretically (Reference 3.5) in terms of the large
distortion of the potential surface at the enlarged grid opening. The local gradient
initiates electron flow that in turn drags ions out across the surface. The result is the
formation of the intense space charge neutralized ion beam (or "plasma jet") at that
location. Such operation has been routinely obtained in laboratory IEC devices under
steady-state operation, with the plasma jet being maintained for hours. The power
carried by the jet has been demonstrated by heating a target plate placed in its path.
Over half of the energy imparted to the ions by the accelerating grid is effectively
funneled into the jet, and no major losses of ions to the vacuum chamber wall or grid
24
UNCLASSIFIED/ 'EAR AEEJCJOP 1!55 OIIU{
•