Documents / Report

Defense Intelligence Reference Document Inertial Electrostatic Confinement Fusion

Defense Intelligence Agency · 72 pages · text from the file's own layer

This Defense Intelligence Agency reference document, dated 10 March 2010, covers inertial electrostatic confinement (IEC) fusion. It was produced in FY 2009 under the DIA's Advanced Aerospace Weapon System Applications (AAWSA) program. The report focuses on work at the University of Illinois Urbana-Champaign and reviews IEC basics, experiments, theory and applications such as neutron sources, explosives detection and space propulsion. It concludes by proposing a breakeven experiment for p-11B fusion that uses a hydrogen plasma simulation.

  • p. 8 …This is important for long run times since 10n bombardment of the grids, hence grid wire…
  • p. 9 …This time can be restated in terms of the number of ion recirculations in the IEC…
  • p. 15 …This work and others on the small gridded systems at that time showed several important problems…
  • p. 17 …interesting concept is the idea of ion focusing, either in space or time, or some other…
  • p. 18 …confinement time for aneutronic fusion. This assumes, however, very precise control is maintained over the energy…
  • p. 23 …By selecting the pulse width to match or exceed the ion confinement time, typically order of…
  • p. 27 …This is the approach used at the UIUC. However, introduction of the source into the configuration…
  • p. 30 …The second jet would serve the integration purpose of the platform without having to expend time…
  • p. 35 …The issue then is how to achieve adequate confinement times. The approach being pursued at UIUC…
  • p. 36 …step in a timely fashion, however. The Dipole Assisted IEC (DaIEC) The dipole assisted IEC DaIEC…
  • p. 38 …in the current experiment. It is found that electron density increases about 17 times more than…
  • p. 41 …Namely, the time scale for collisional degradation of the beam-like ion distribution function is crucial…
  • p. 42 …would homogenize the speed within the ion beam a~er some time, making the speed difference…
  • p. 43 …1) The electrostatic well is deep enough (Eo > 100 kV); 2) Ion confinement time is long…
  • p. 44 …The source to sink issue noted several times here can be explained as follows. Two opposite…
  • p. 49 …The time convergence test suggests that employing the largest time step compatible with accuracy in a…
  • p. 50 …When an ion beam is hot, the waves excited by the instability are ion acoustic type…
  • p. 51 …used an analytical model of charge- exchange collisions in the IEC plasma to include ion time…
  • p. 53 …Nevins, Can inertial electrostatic confinement work beyond the ion-ion collisional time scale?" Phys. Plasmas, Vol…
  • p. 54 …This method uses a pulsed high-energy neutron source and the time-of-flight (TOF) diagnostics…
  • p. 57 …The longer the charge time, the higher the charge in the energy storage capacitor bank and…
  • p. 58 …The challenge in these systems is that the unloading time is short and the container is…
  • p. 59 …by the number of detectors, the detector configuration, the collimated beam size, the acquisition time, and…
  • p. 62 …The Tokamak has a shorter trip time by employing a power level that is six times…
  • p. 63 …In this fashion, an array of multiple IECs increase the overall confinement time roughly in proportion…
  • p. 64 …This recirculation significantly increases the confinement time verses that of a simple cusp devise, leading to…
  • p. 65 …This re-trapping greatly increases the confinement time of a MCSA fusion device. 58 UNCLASSIFIED/;CEiOAt…
  • p. 66 …in the IEC high power-to-weight of the MCSA enables fast trip times. The concept…
  • p. 67 …across the outer surface, so increased confinement times have been achieved by going to the massively…
  • p. 68 …Here n is the ion density and Tis the ion confinement time. Assuming the converged core…
  • p. 69 …A specially designed radio frequency (RF) ion gun is installed on the side of the chamber…
UNCLASSIFIED/ ,era A 8FFlil.l1k WE&i a•lk¥
This capability can provide valuable data regarding 3He fusion cross sections at "low"
energies with better counting statistics than accelerator measurements. It appears that
good progress has been made in this direction.
CLOSING COMMENTS
The experiments selected for this section are far from exhaustive. The main
concentration here is on ion-injected IECs such as studied at the UIUC, although
various electron injected devices such as the "Polywell" are mentioned. The
experiments were selected then to explain some issues and status relative to gridded
devices for near-term applications such as neutron sources and also to address some
issues such as ion injection related to future fusion power units. The latter issues
revolve around how to create deep potential wells in the IEC and trap the reacting ions
in the well while excluding neutral gas atoms. The use of external ion sources with
differential pumping then becomes a key approach for production of ions while keeping
ultra low background pressure in the reacting chamber. This is the approach used at
the UIUC. However, introduction of the source into the configuration such that the ions
are born at potentials below the well depth is another possibility as shown by the hybrid
magnetron source work in Japan. Another point noted is the advantage of using pulsed
operation to obtain high peak ion currents to take advantage of the ion density squared
scaling for beam-beam reactions.
REFERENCES
2.1 R. L. Hirsch, "Inertial-Electrostatic Confinement of Ionized Fusion Gases," J. Appl.
Physics 38, no.11, (1967) pp. 4522-4534.
2.2 A. L. Gardner, "Studies of Charged-Particle Distributions in an Electrostatic
Confinement System, "U. S. Atomic Energy Commission Final Report N. C00-2180-7,
Washington, D. C. (1974).
2.3 G. H. Miley, Y. Gu, J. M. DeMorea, R. A. Stubbers, T. A. Hochberg, J. H. Nadler,
and R. A. Anderl, "Discharge Characteristics of the Spherical Inertial Electrostatic
Confinement (IEC) Device," IEEE Transactions Plasma Science, Vol. 24, No. 4, (1997)
pp. 733-739.
2.4 T.J. McGuire and R.J. Sedwick, "Improving IEC Particle Confinement Times Using
Multiple Grids" 7th US-Japan IEC Workshop, Los Alamos National Laboratory, NM,
March 14-16 (2005).
2.5 R.A. Anderl, J.K. Hartwell, J.H. Nadler, J.M. DeMora, R.A. Stubbers, and G.H.
Miley, "Development of an IEC Neutron Source for NDE," 16th Symposium on Fusion
Engineering, eds. G.H. Miley and C.M. Elliott, IEEE Conf. Proc. 95CH35852, IEEE,
Piscataway, NJ, (1996) pp. 1482-1485.
2.6 Y. Gu, M. Williams, R. Stubbers, and G. Miley, "Pulsed Operation of Spherical
Inertial-Electrostatic Confinement Device", Fusion Technology, Vol. 30, no. 3, (1996)
pp. 1342-1346.
20
UNCLASSIFIED/ ,<EiOAt OEiEilil.ltk Wli&i &••LY

Not linked to a story yet.

About this file

Report, from the dia collection. The PDF is mirrored here; the original link is under it. 72 pages are in the text index: search them above, or from the library's search.